3 Main Causes of Xbox 360 Red Ring of Death – The Easiest Method to Repair RROD Problem at Home
Xbox 360 is undoubtedly one of the best gaming consoles available in the market today. With its high quality graphics and state of the art GPU it is truly a gamers paradise. But there are a few worrisome errors associated with it. And one of the most concerning problem is the RROD (Red Ring Of Death). This article will help you solve this problem.
The Red Ring Of Death is a problem in which 3 red LED lights glow around the power button. This problem is caused mainly due to 3 reasons which are loose connections which may occur due to vibration or if the soldering is improper causing dry solders and the last and most common reason is of the GPU getting overheated.
This article is written assuming you have basic technical knowledge about Xbox 360 parts. The first step to do is to shutdown the power supply and open the console. After this take out the DVD player and hard disk drive to access the GPU (graphics processor unit).
Check out if you find any loose connections around the GPU if any then you will have to resolder the loose connections. If you do not find any loose connections then lift the heat sink from the GPU (Caution: Be sure that the heat sink is not hot or you might scald your fingers).
After removing the heat sink apply some thermal paste (which you can easily find in any electronics shop) on top of the GPU and reseat the heat sink on top of it. Now attach the X shaped clamp which holds the heat sink to the motherboard. Fix back the DVD player and hard disk drive. Put back the console cover and turn on the power supply. In most cases your Xbox 360 should start functioning properly.
If you are a newbie and are not aware of Xbox 360 parts then a step by step illustrated Xbox 360 repair guide accompined by a video is a must. These guides illustrate in great details the procedure involved to fix the Xbox 360 and have actual videos of the Xbox 360 being repaired. From removing the screws, to naming the parts, to applying the thermal paste, to fixing it back everything is shown.